Home > Anchorage Connectors > Capital Safety Lad-Saf Ladder Safety System
Capital Safety Lad-Saf Ladder Safety System
Item No: DBI01-Straight-Fixed
The Lad-Saf ladder safety system from Capital Safety is an essential piece of fall protection equipment for anyone working at heights and regularly ascending towers, poles, tanks or wind turbines. Easy to install and tailor made for each site (even curved ladders can be catered for), these kits will offer you an unprecedented level of safety and security for your work site.
Built to fit any working site where a fixed ladder is in place (with rungs up to 1-1/8” in size), a top bracket and an impact bearing bottom bracket are provided. The latter of which has an elastomeric impact attenuator to spread the load across the whole ladder.
Simply attach by either bolting on or welding, the Lad Saf system has attachment options for a range of structures: wood, steel and concrete.
Designed for use with the Lad-Saf sleeve acting to arrest a fall; with the sleeve itself following the user up the line for a hassle free and safe ascent or descent of the ladder.
Easy to set up with only a wrench, an in-built tension indicator shows when the cable is tight enough for safe use.
Made from corrosion resistant galvanized steel and featuring non-metallic cable guide loops to prevent wear, the Lad-Saf system will last for a long time. Should you be working in a highly corrosive site, stainless steel options are available for increased corrosion resistance. The stainless steel is made out of 304 stainless steel.
Crucial for any high work sites, or deep confined space work the Lad-Saf system is an almost essential addition for refinery, oilrig and gas engineers, wind turbine technicians, construction workers and more. And as it meets or exceeds OSHA, ANSI, CSE and CE standards, you can be sure that it will make your site safer.
Related Products :
6116280 : Top Bracket Assembly
6100090 : Bottom Bracket Assembly
6100400 : Cable Guide Assembly
6116540 : Dual-Use Lad-Saf Cable Sleeve
Built to fit any working site where a fixed ladder is in place (with rungs up to 1-1/8” in size), a top bracket and an impact bearing bottom bracket are provided. The latter of which has an elastomeric impact attenuator to spread the load across the whole ladder.
Simply attach by either bolting on or welding, the Lad Saf system has attachment options for a range of structures: wood, steel and concrete.
Designed for use with the Lad-Saf sleeve acting to arrest a fall; with the sleeve itself following the user up the line for a hassle free and safe ascent or descent of the ladder.
Easy to set up with only a wrench, an in-built tension indicator shows when the cable is tight enough for safe use.
Made from corrosion resistant galvanized steel and featuring non-metallic cable guide loops to prevent wear, the Lad-Saf system will last for a long time. Should you be working in a highly corrosive site, stainless steel options are available for increased corrosion resistance. The stainless steel is made out of 304 stainless steel.
Crucial for any high work sites, or deep confined space work the Lad-Saf system is an almost essential addition for refinery, oilrig and gas engineers, wind turbine technicians, construction workers and more. And as it meets or exceeds OSHA, ANSI, CSE and CE standards, you can be sure that it will make your site safer.
Related Products :
6116280 : Top Bracket Assembly
6100090 : Bottom Bracket Assembly
6100400 : Cable Guide Assembly
6116540 : Dual-Use Lad-Saf Cable Sleeve
Price:$7.50 Sale Price:$7.00 |
Price:$23.00 Sale Price:$21.50 |
Price:$42.50 Sale Price:$38.50 |
Price:$79.50 Sale Price:$72.00 |
Price:$91.00 Sale Price:$83.00 |
