DBI SALA Talon Twin-Leg 100%Tie-Off SRL
Product Description
Talon Twin-Leg 100% Tie-Off Self Retracting Lifeline (3102000 with 2-1/4 in. Aluminum Rebar Snap Hook Shown). Please click on the inset at left view the hook options available.
The Talon Twin-Leg 100% Tie-Off SRL from DBI/Sala is a unique new product that offers added mobility vs. a conventional shock absorbing lanyard. With two independent 6 ft. lifelines contained inside one compact unit, you get 100% tie-off capabilities for safe work at heights. The inertia activated braking system gives quick response time, shorter fall distance and reduced arresting forces. An added benefit is not having slack webbing in the way. A Delta harness comfort pad for use on webbing-type harnesses (not needed on Exofit) and 2 lanyard keepers are included to round out the package.
The compact and durable nylon housing is light weight with a quick connect handle (similar to the standard Talon SRL) for attachment directly to your harness. Intended for DBI harnesses, but should fit most any on the market. No service / recertification required, except in the case of a fall or damage, which reduces the cost of ownership. Extra-strong and long-lasting materials have been used for extended product life. 1 in. wide yellow nylon webbing lifelines and a variety of snap hook options allow you to tailor this item to your job requirements.
Part Numbers:
3102000 w/ 9502058 aluminum hooks (2-1/4 in.) Weight 5.4 lbs.
3102001 w/ 9502116 snap hooks (3/4 in.) Weight 5.0 lbs.
3102002 w/ 9502195 swivel snap hooks (3/4 in.) Weight 5.1 lbs.
3102003 w/ 2109193 steel rebar hooks (2-1/4 in.) Weight 6.4 lbs.
Please click on the inset above to view the hook options available.
Materials:
Web Lifeline: 1 in. wide nylon, 5,000 lb. tensile strength, 6 ft. length ea. line
Housing: nylon type 6-6, blue
Drum: reinforced nylon type 6-6
Drum Flange: aluminum
Drum Spring: stainless steel, type 301
Ratchet Pawls: stainless steel, heat treated
Ratchet Plate: alloy steel, heat treated
Shaft: aluminum
Snap Hook: alloy Steel or aluminum, 5,000 lbs. min. tensile strength,
Quick Connect Handle: alloy steel, heat treated
Complies with Standards:
OSHA 1910.66 , OSHA 1926.502
ANSI Z359.1-2007
CSA Z259.2.2 (type 1)
Capacity: 310 lbs. including person, tools, etc.
Weight: 5.4 lbs. with aluminum hooks (2-1/4 throat opening)
Size: 7.2 in. long x 3.8 in. wide x 2.6 in. thick (main housing assembly)
Maximum Arresting Force: 900 lbs.
The Talon Twin-Leg 100% Tie-Off SRL from DBI/Sala is a unique new product that offers added mobility vs. a conventional shock absorbing lanyard. With two independent 6 ft. lifelines contained inside one compact unit, you get 100% tie-off capabilities for safe work at heights. The inertia activated braking system gives quick response time, shorter fall distance and reduced arresting forces. An added benefit is not having slack webbing in the way. A Delta harness comfort pad for use on webbing-type harnesses (not needed on Exofit) and 2 lanyard keepers are included to round out the package.
The compact and durable nylon housing is light weight with a quick connect handle (similar to the standard Talon SRL) for attachment directly to your harness. Intended for DBI harnesses, but should fit most any on the market. No service / recertification required, except in the case of a fall or damage, which reduces the cost of ownership. Extra-strong and long-lasting materials have been used for extended product life. 1 in. wide yellow nylon webbing lifelines and a variety of snap hook options allow you to tailor this item to your job requirements.
Part Numbers:
3102000 w/ 9502058 aluminum hooks (2-1/4 in.) Weight 5.4 lbs.
3102001 w/ 9502116 snap hooks (3/4 in.) Weight 5.0 lbs.
3102002 w/ 9502195 swivel snap hooks (3/4 in.) Weight 5.1 lbs.
3102003 w/ 2109193 steel rebar hooks (2-1/4 in.) Weight 6.4 lbs.
Please click on the inset above to view the hook options available.
Materials:
Complies with Standards:
Capacity: 310 lbs. including person, tools, etc.
Weight: 5.4 lbs. with aluminum hooks (2-1/4 throat opening)
Size: 7.2 in. long x 3.8 in. wide x 2.6 in. thick (main housing assembly)
Maximum Arresting Force: 900 lbs.
