DBI/SALA Leading Edge Concrete Anchor

The DBI/Sala Leading Edge Concrete Anchor was developed to provide fall protection for workers who work on pre-cast concrete. When used in conjunction with the Ultra-Lok Leading Edge SRL, the anchor provides 360° of mobility and protection for the workers. SRL shown for illustration, but must be ordered separately. Also with its two-in-one design the anchor also serves as end anchors for a temporary horizontal lifeline system.

Installation :
With the built-in ratchet anchoring system, installing is simple, fast and very efficient. Using the ratchet’s hook connect it directly to the lifting rings on the pre-cast deck. You can easily move the system from one location to another while the next pre-cast deck is being flown into place.

Anchorage Requirements :
For fall arrest applications, the lifting ring must be able to support 10,000 lbs in a vertical direction and 5,000 lbs in a horizontal direction. For fall restraint applications, it must support 6,000 lbs vertically and 3,000 lbs horizontally.

Specifications:

Tripod Base: Carbon Steel with Zinc plated finish

Swivel Head: Carbon steel with black e-coat finish

Webbing: Polyester

Ratchet: Carbon steel with Zinc plated finish

Capacity: 310 lbs

Weight: 33 lbs without SRL

Size: 26” length x 26” width x 24” tall

Minimum Breaking Strength: 5000 lbs

Meets or Exceeds all Applicable OSHA Standards

The anchor does not include the SRL shown in the picture. It must be ordered separately.