Capital Safety DBI-SALA 1241125 EZ Stop II Tie-Back with Rebar Hooks

Capital Safety’s DBI-SALA 1241124 EZ-STOP II Tie-Back Lanyard is equipped with a large 2.5 in. opening steel rebar hook to be used on a variety of anchor points, including tie-back applications. The floating d-ring gives a secure tie-back anchor when looping around pipes, beams or other odd shaped locations.

The flat steel rebar hook allows the user to have a greater versatility in the field by being able to snap into various anchorage points, or tie back around them. This is possible due to the larger rebar hooks having a stronger gate strength. With the 2-1/2 inch gate opening of the flat alloy steel snap hook, a variety of anchor points, even many concrete wall forms, are possible.

The floating d-rings adjusts to anchor around the job site on various structures. The EZ-STOP II Tie-Back lanyard meets OSHA and ANSI Z359 and all other applicable industry standards. For enhanced durability, an abrasion resistant tubular webbing covers a 9,800lb polyester web.



Similar Single Leg Models:
1241124: 1 inch polyester web, single leg, floating D-ring on leg end, standard and aluminum rebar hook ends
1241106: 1 inch polyester web, snap hooks at both ends, floating D-ring allowing lanyard to be chocked off x 6 feet