Capital Safety 5900550 Cable Choker Anchor

The steel Cable Choker 5900550 from DBI/SALA features a pass-through design makes attaching to an anchorage point quick and easy. The 7x19-3/8 in. x 4 ft. stainless steel cable construction is abrasion resistant and makes for a very durable product. Construction sites where welding is happening nearby are perhaps the best example of where to use this product . Webbing anchors can be burnt easily by welding slag and spatter. Not true with cable.

The 4 ft. length is our most popular, but 6 ft. lengths are available. Features a larger D-ring at one end and a smaller O-ring at the other, which allows you to loop over a steel beam or other secure anchorage point and pass one ring through the other to 'choke' down on the anchor point. Steel hardware is plated for corrosion resistance and strength.

Meets or exceeds all applicable industry standards including OSHA and ANSI Z359.

This cable choker is one of our most popular anchorage connectors combining light weight and high strength (5,000 lb. Min. tensile strength). It provides you with an anchorage connector that can be used almost anywhere an anchorage point is needed.

Part numbers:
5900550 4 foot length
5900551 6 foot length